Gabriel's Heat Stove
INSTRUCTION MANUAL for GABRIEL'S HEAT STOVE
​​
Gabriel's Cabin has a propane powered heat stove that is managed by the thermostat on the post by the kitchen. You can hear the hum of the pilot light when it is on. If you find that the heater is not turning on and the temperature is dropping the pilot light may have gone out. Here's the instructions to get that back on.
​
Open the bottom of the stove to see the knobs under the stove.
-
To the far left is a round knob that says "on" "off" and "pilot".
-
Turn this knob to "pilot" facing to the bottom.
-
On the far right is a long red button that will provide the spark.
-
Push in the "pilot" knob while you push in the red button a few times.
-
Listen for the sound and look out for the pilot to light inside the stove.
-
Turn the knob on the left back to the "on" position.
-
Repeat these steps until the pilot light stays lit and the heat comes back on.
​
CONTACT:
Laura Rowe and Krista Arendsen live in the main house (Phoenix House). If you’d like to meet us or have any questions we can be reached at 734-210-7812.
​
Brian and Karen Cool are our amazing and helpful property managers. You can contact them for information or in case of emergency at 231-768-4624.
​
​
Find the pilot light
Look down into the left side of the heater and see if you can see the pilot. If not go to step 2
Spark it!
While keeping the pilot knob pushed in. Start pushing the long red button in a few times over and over.
Open the bottom
The bottom of the heater opens from the left side and reveals these knobs.
Listen for the hum
Listen for the sound of the pilot humming and look through the "logs' to see if you can see the small blue flame.
Turn the knob
Rotate the knob on the far left until "Pilot" is at the bottom. Now press this knob in.
Turn the knob back
Rotate the knob on the far left back to the 'ON" position and make sure the pilot stays lit. Repeat until it does.